Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SLIMCOOL
EN
How to deactivate remote control:
In order to deactivate remote control, push key
play. Once it stops flashing, push key
or else you will have to repeat the whole operation.
Equipment switching on
In order to switch on SlimCool, push the On/off key
F4
(Automatic Function). To change function, push the On/off key
functions will be displayed one by one. Release key when desired function is reached. The
first time equipment is switched on, it will be initiated with the pre-established parameters.
Function F4 - Automatic unit operation
F4
Selecting
allows the user to choose the comfort temperature 15ºC to 27ºC (59ºF to 71ºF),
which will be selected from the control panel
selecting, the display will switch between
unit automatically regulates and controls comfort temperature by acting on the compressors
and the blower speeds. Pressing the remote control
F0
to
(Manual Function). The unit runs initially in
Function F0 - Manual operation
F0
To select
the display shows the set temperature and allows the user to choose the
comfort temperature which will be displayed from 15ºC to 27ºC (59ºF to 71ºF) and to
vary the unit blower speed (5 speeds indicated with the characters
Comfort temperature can be controlled by briefly pressing the keys
panel or
The blower speeds are controlled by keeping the keys
down
or from the remote control, with the display showing
display shows the degrees selected when the unit is running.
remote control.
-
of control panel until
+
on panel. You will have to do it within 30 seconds
. Equipment always starts on function
-
+
or the remote control
CA
and the degrees selected. With this function the
key cancels function
F4
with the default parameters.
+
10
C
, flashes on dis-
and the various
F4
V1
V5
to
).
-
+
. of the control
-
of the control panel pressed
V1
V2
V3
V4
,
,
,
®
. When
and moves
V5
,
. The
Publicidad
Tabla de contenido
