Descargar Imprimir esta página

HumanTechnik TA-2 Instrucciones De Servicio página 12

Ocultar thumbs Ver también para TA-2:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
Important!
1. Please use a small screwdriver
when altering the DIP switch
settings!
2. Make sure the DIP switches are
fully clicked into in their end
positions.
3. Do not set the DIP switches to any
other settings.
Maintenance and care
All units are maintenance-free. If the
unit does become dirty, simply wipe it
clean with a soft, damp cloth.
Never use spirits, thinners or other
organic solvents. Do not set up the
unit where it will be exposed to full
sunlight for long periods. In addition it
must be protected against excessive
heat, moisture and severe mecha-
nical shocks.
Note: This product is not protected
against splash water. Do not place
any containers filled with water, such
as flower vases, or anything with an
open flame, such as a lit candle, on
or near the product.
Please make sure that the batteries
are not exposed to excessive heat
from such as sunlight, fire or anything
similar.
12 English
Warranty
The TA-2 is a very reliable product.
Should a malfunction occur despite
the unit having been set up and
operated correctly, please contact
your dealer.
This warranty covers the repair of the
product and returning it to you free
of charge. It is recommended that
you send in the product in its original
packaging, so keep the packa-
ging for the duration of the warranty
period.
The warranty does not apply to
damage caused by incorrect hand-
ling or attempts to repair the unit by
people who are not authorised to
do so (destruction of the seal on the
unit).
Repairs under warranty are only
carried out providing you have filled
in and returned the enclosed warranty
card from the dealer.
Always specify the product number
in any event.

Publicidad

loading