Installation - Jofel JET-SMART AA24050 Manual De Instalación

JET SMART HAND DRYER

3. INSTALLATION

For correct installation, please follow the next steps:
1- Remove back cover. Break die-cut opening, which is designed to pass power cord through and
screw it to connection strip. Screw duct provided as a protection to prevent cord to be pulled
accidentally.
NOTICE: Power cord is not supplied with the device, it must be installed by a qualified technician.
Cable MUST BE TYPE H05RN-F 2 x Ø 1.5mm.
JOFEL INDUSTRIAL S.A.
Connec on strip for
power cord to network
230V 50Hz
C/ La Rioja nº3 Alicante, España
Restraint
system for
power cord
(an -pull
protec on)
POWER CORD H05RN-F
2 x Ø 1.5mm
www.jofel.com
EN
Pag.5