Publicidad
3¾"
2½"
⅞"
⅝"
Max. flow rate - handshower
Capacité nominale - douchette
Caudal máximo - teleducha
Tools Required / Outiles Utiles /
Herramientas Útiles
17 mm
12 mm
This unit meets or exceeds the following:
•
•
•
2
4¾"
1⅜"
2.5 GPM
2.5 GPM
2.5 GPM
ASME A112.18.1
CSA B125.1
Listed by IAPMO for use in the US
and Canada
Installation Considerations
• For best results, Hansgrohe recommends that
1"
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
• This trim is for use with rough 10650181.
• The finished wall surface must be installed and
made watertight before installation of this trim.
• To prevent scald injury, the maximum output
temperature of the shower valve must be no
higher than 120° F.
• Protection against back siphonage is provided
by a double check valve. It should be inspected
yearly.
• In Massachusetts, the maximum output
temperature of the shower valve can be no higher
than 112° F.
Publicidad
