Set Training - Bryton Cardio 30 Guía De Usuario

Note: The type of data displayed depends on the current mode:
• Total time is displayed when an activity is started.
• Lap info appears only when training is set to Lap mode.
• Interval time appears only when training is set to Interval mode.
• ETA (Estimated Time of Arrival) appears only when training is set to distance.
• Screen legends:
H = Heart Rate
C = Cadence
• If the screen below appears, the device cannot detect the sensor. Adjust the
sensor and connect again.

Set Training

Use the Training setting to select the type of training you want.
Training can be based on easy, zone, lap, or interval.
Note: After setting the Training mode, short press
results of your training.
14
S = Speed
R = Stride Rate
START/STOP
= Distance
to record the