Assembly; Installing The Wheels; Operating Instructions Placement - RIDGID SeeSnake Standard Manual Del Operador

Assembly

Installing the Wheels

Installing the wheels incorrectly may result in property
damage and/or serious injury.
Wheels
Foot
Washers
1. Slide washer onto axle and seat against foot.
2. Slide wheel onto axle.
3. Place ribbed rigid tube between the two axle hubs.
Frame may need to be flexed slightly.
4. Slide axle from outside right, through hub and rigid
tube, and out the other hub.
5. Place second wheel on axle.
6. Place washer on axle and seat on wheel hub.
7. Secure with cotter pin at axle end.
Find Quality Products Online at:
WARNING
Rigid
Tube
Cotter Pin Axle
GlobalTestSupply
www.
Operating Instructions
Placement
Set up your SeeSnake system near the pipe entrance so
you can manipulate the push cable while viewing the moni-
tor. Make sure that the drum can spin freely. Placing the reel
where the drum cannot spin freely may result in over-wind-
ing the cable, which may result in property damage and/or
serious injury.
Lay the See Snake on its back for greater stability, particular-
ly when on a rooftop, overhead entry, or hillside.
SeeSnake Standard – English – 9
.com
sales@GlobalTestSupply.com