Important - Ikegami IEN-T01 Manual De Instrucciones

ActiveX is installed and the monitor screen shows up.
10. Setting the encoder
* Selecting a mode on the monitor screen
Choose a mode from "Monitor", "Setting" and "Maintenance".
* The encoder's IP address (initial setting 192.168.1.100) can be changed in "IPv4" in the "set-
ting" mode.
* For details, download the Applied Instructions from the following URL.
The Applied Instructions can be downloaded from the
following URL.
URL http://www.ikegami.co.jp/en/products/security/network/index.html
* Simplified set-up tool
This tool helps change the network camera/encoder's IP address in a simple way. To change
the IP address on multiple units, this is very convenient.
You can download the tool (software) from the above website. Before use, carefully read the
"Simplified Set-up Tool" instructions.
Making the IP address and other settings

IMPORTANT !

The document includes the following topics.
* Connecting the camera and encoder
* Making basic settings (IP address change)
* Using the alarm function
* Operating the camera
* Making other settings
* Maintenance
* Troubleshooting
* Glossary
E-11