Leviton EVR30 Manual De Instalación página 7

STEP 3
Align the screw holes of the mounting bracket
with the Charging Station. Install and secure the
Charging Station on the mounting bracket with
the two (2) Torx T30 bolts supplied. Torque to
13 lb·in (1.5 N·m).
Secure the remaining mounting screw in the
bottom bracket as described in step 2.
STEP 5
Hold the front cover. Flip upward and then shift
leftward to separate the front cover from the
charger.
90˚
www.leviton.com/evrgreen
STEP 4
Remove the screw located at the bottom of the
front cover.
STEP 6
Remove the compartment cover as shown below.
4