Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for Use
14. (Fig. 10) Adjust the mirror
to either normal or
magnified viewing. To
do so, swivel the mirror to
the viewing side of your
preference. You may also
adjust the angle of the
mirror by tilting it up and
down or swiveling it from
side to side.
15. Plug unit into a 120V
household outlet.
16. (Fig. 10) Turn the On/Off
switch 1-
to the ON
position to turn the
mirror on.
17. (FIG.10) When finished
using the mirror turn the
switch to the OFF position
1-
.
Fig.10
-1
NOTE: DO NOT EXCEED
6 POUNDS ON THE GLASS
VANITY TRAY.
NOTE: NEVER leave a
plugged in appliance
unattended. DO NOT
exceed 12 amps on the
electrical outlet.
14
To Replace Bulb:
Caution: Before replacing the bulb, always turn mirror off
and allow it to cool for at least 5 minutes.
• (Fig. 11) Remove the three
screws on the side of the mirror
with a Phillips screwdriver.
• (Fig. 12) Take off the mirror
casing by gently pulling apart
at the seam.
• (Fig. 12) Unscrew light bulb
and replace with a new one.
Light bulb is 120v, 25 Watt
Type T. For your
convenience, one
replacement
bulb is included.
• Replace the mirror
casing and line up
the screw holes.
Screw back into place.
Fig.11
screws
Fig.12
light
bulb
15
Publicidad
Tabla de contenido
