Personnel Qualification; Personal Protective Equipment - WIKA GA11 Manual De Instrucciones

3. Safety
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Plugs and sockets must be
protected from contamination.
EN
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
3.2

Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
■
■
Trained personnel
The plant operator must ensure that the handling of SF
out by a qualified company or by qualified persons which have been specially trained in
accordance with IEC 61634, section 4.3.1 or IEC 60480, section 10.3.1.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.
3.3

Personal protective equipment

The personal protective equipment is designed to protect the skilled personnel from
hazards that could impair their safety or health during work. When carrying out the
various tasks on and with the instrument, the skilled personnel must wear personal
protective equipment.
Follow the instructions displayed in the work area regarding personal protective
equipment!
10
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
Keep unqualified personnel away from hazardous areas.
WIKA operating instructions analytic instrument, model GA11
gas and g³ gas is only carried
6