iTEC iViewer 02 HD Manual De Instrucciones página 16

ADVANCED MECHATRONIC SOLUTIONS
controlo de acessos | access control | control de acceso | contrôle d'accès
iViewer 02 HD®
Motion Detector Setting:
-Motion detection is turned OFF as the default setting. To turn motion detection ON, move the motion detec-
tion switch to ON. (This can be moved by thin pointed objects e.g. ball point pens, toothpicks or paper clips)
-The effective range of the motion detector is approximately 0.5-1m (it will be affected by the ambient bright-
ness and temperature).
-Three working modes can be set for motion detection:
a. Photo mode, one picture will be taken when triggered, the display screen is not activated;
b. 5S video mode, a video lasting for 5 seconds will be available when triggered, and the display screen will
start automatically at the same time;
c. 10S video mode, a video lasting for 10 seconds will be available when triggered, and the display screen will
start automatically at the same time;
- After installing new batteries, the motion detector will self check and self adjust for 30 seconds and will have
no response during this period.
- Since the power consumption of motion detection is high, users are recommended to start this function
only when necessary.
Replay and edit of the stored photos/videos:
- The stored photos and videos can be played on this product, and can also be deleted or edited.
- When the screen is on, press the "▲" and hold till the " " icon appears, which indicates the replay mode is
on.
- Select the photo or video you want to play using the "▲▼" button.
- If you want to delete certain photo or video, press menu button when it's displaying to edit.
Other setting options:
- To format the memory card, please choose this option.
This process cannot be reversed, once the process finishes all data and operations in this card will be remo-
ved. Be cautious!
Door bell:
Users can set the type and volume of the door bell ring. Choose the "Ring Setting", press menu button to
enter, and press "▲" button to choose door bells. In the volume setting , choose " High" mode to maximize
the volume; choose "Low" mode to turn down the volume to 70% of the maximum; choose the "OFF" mode
to turn off the door bell into DND (Do Not Disturb) mode.
Camera (Video) ON/OFF:
Some countries and areas have strict rules that no one is allowed to take photos or videos of other people
without permission, so users can choose ON/OFF of the camera (video).
Press menu button to enter " camera" menu, when the mode is "ON", this product will automatically take a
photo when the door bell is pressed;
- If you choose the Factory reset option, all the settings will be reset to the original state. All the user settings
will be cleared. Be cautious!
Infrared function:
- This product has an infrared function, which enables user to observe outside images at night or in dark
areas.
- Due to the image-forming principle, all images shown on the screen in infrared are black and white, which is
normal.
16
www.itec.com.pt