Dometic PERFECTROOF PR 4500 Instrucciones De Montaje página 13

PR4500
• After gluing, wait until the adhesive has set. For further details, please refer to the
information provided by the sealant manufacturer.
• Carefully seal the drill holes to prevent moisture from entering the motorhome
wall.
• Do not open the awning or leave it unattended, before the awning has been
fastened to the mounting rail.
• As part of the regular maintenance procedure, the screws on the rear hinge must
be tightened up by a service partner. Ensure the users of the vehicle are aware of
this.
➤ Install the awning using the instructions in the operating manual enclosed with
your mounting rail.
➤ Connect the awning to the power (see chapter "Connecting electrical power to
the awning" on page 14).
Contact a qualified electrician so that the current electrical regulations are
complied with.
➤ Find a suitable place inside the motorhome away from direct sunlight to install the
wall bracket for the remote control (fig. 6, page 6).
EN
Installing the awning
13