Manual Station Preset - Panasonic CQ-C8405U Manual De Instrucciones

Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [}]
(P-SET) or [{] (P-SET).
Notes:
¡
Direct selection can be executed with [1] to [6] but-
tons on remote control.
¡
You can switch between 6 and 18 for FM presetting
stations. (EACH BAND/ALL BAND)
¡
Preset stations are changeable. (Preset Swap)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press [}] or [{].
Note: New stations overwrite existing saved stations.
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press [PUSH SEL] to adjust.
For using the remote
control, use [BAND]
(SET).

Manual station preset

1
2
3
4
Notes:
¡
In step 2, a station can be registered by holding down
CQ-C8405U the numeric button [1] to [6] for 2 sec. or more.
¡
To stop presetting stations, press
DISPLAY
/ /SET/APM TILT
BAND DISP OPEN
¡
The operation above allows users to replace the cur-
rent station with the station preset in the selected
number while selecting a preset station. (Preset Swap)
3
SOURCE PWR
SQ
MENU
DIM
TUNE
PRESET
TRACK
FOLDER/P-SET/DISC
MUTE
D ・ M
SBC-SW
LIST
Preset range for FM bands
SOURCE PWR
SQ
MENU
DIM
TUNE
TRACK
FOLDER/P-SET/DISC
MUTE
・
D M
SBC-SW
LIST
Tune in to a station.
Hold down [}] or [{] for 2 sec. or
more.
Turn [VOL] to select a preset number.
Hold down [PUSH SEL] for 2sec. or
more, and the frequency is stored at the
selected preset number.
] .
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
: Individual setting for FM1-3 each
(default)
: Setting of FM1-3 together
CQ-C8405U/C8305U
[DISP:
21