Customize The Display (Customize Function) - Panasonic CQ-C8405U Manual De Instrucciones

Customize the Display (Customize Function)

You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from
the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software,
IMAGE STUDIO. See "Notes on Customize function"
Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.
Preparation:
Put the CD-R/RW that contains data to
be customized in hand.
1
If there is a disc inside, take out the
disc.
2
Press [SOURCE]
(PWR) to select
the CD mode.
3
Hold down [PUSH SEL] for 4 sec. or
more to display the menu screen.
4
Load a CD-R/RW that contains data.
Notes:
¡
It may take time for the unit to identify the CD-
R/RW.
¡
Discs recorded by the packet writing software are
not supported.
5
Select an item to be customized.
q w :
[PUSH SEL]: Confirm
Note: To exit the customize menu, hold down
[PUSH SEL] for 4 sec. or more.
GRAPHIC PATTERN
Moving image (graphic pattern) data
STILL IMAGE
Still image data
OPENING MESSAGE
Moving image at power on
CLOSING MESSAGE
Moving image at power off
(a page 32) as well.
SOURCE
TUNE
TRACK
FOLDER/P-SET/DISC
MUTE
・
D M
SBC-SW
Select
(a page 30)
(a page 30)
6
Select a file.
q w []][[]: Select
[PUSH SEL]:Confirm
PWR
SQ
MENU
Notes:
DIM
¡
Files are automatically identified by their exten-
LIST
sions, and target files are displayed.
¡
If "BACK" is selected, the screen of step 5
appears.
7
For a moving image file or still image
file, select where to save the file.
q w [}][{]: Select
[PUSH SEL]:Confirm
Notes:
¡
New data overwrites existing data.
¡
If "BACK" is selected, the screen of step 6
appears.
8
Confirm the changed item.
q w :
[PUSH SEL]: Confirm
Customization is performed. Do not turn off the
power in mid-operation. (It takes approx. 5 minutes
to complete this operation for a 548 kB moving
image.) After completion of this operation, the
screen of step 5 appears.
Note: If "NO" is selected, the screen of step 5
appears.
9
Press [uOPEN] to eject the disc.
10
Hold down [PUSH SEL] for 4 sec. or
more.
The CD mode comes back.
CQ-C8405U/C8305U
Select
31