Important Recommendations; Work Area - TRAPP Master 3000 Manual De Instrucciones

www.trapp.com.br
Congratulations!
You have acquired a quality product that has been developed using TRAPP's
spearhead technology. With this cost-effective and safe product, you can do your
work quickly and safely. For this, you must observe some extremely important
safety measures in this Instruction Manual. It is not possible to predict all the
situations that might occur. It is up to the operator to understand that common
sense, attention and careful operation cannot be added to the product - those who
use and maintain the equipment are responsible for these factors.
Attention!
Read all the instructions in this manual before
operating the equipment. Always observe
and follow the safety indications to prevent
accidents and/or injuries.
Read and keep these instructions.

1 - Work area

Check the area where you will use the
 
equipment. Remove stones, wood debris, wire,
bones, glass and other unwanted objects that
could be flung by the equipment and hurt badly
both animals and people.
Do not use the equipment near explosive-
 
prone atmosphere nor where there are
flammable liquids, gases or suspended dust.
The motor produces sparks that could ignite the
flammable liquid, gases or suspended dust.
Keep children and bystanders away. When
 
the equipment is being used, everyone must stay
away - especially children - at a safe distance
of at least 20 meters far from the operator.
The operator/user is responsible for avoiding
accidents.
Think how you will move to do the cutting.
 
Before you turn on the equipment, simulate the
movements. The right way to do it from the right
to the left.

Important Recommendations

2 - Power safety
Use the right extension cord. Always use the
 
right extension cord, which must be in good
shape, i.e. cannot be mended - never use
insulating tape to make repairs - you will reduce
the risk of electric shocks.
Do not move the equipment by the cord.
 
Never use the extension cord to carry, pull or
unplug the equipment from the power source.
Keep the extension protected from heat, oil,
sharp edges and especially from the equipment's
own blade.
Do not expose the equipment to either rain or
 
humidity. Install the equipment in a dry place,
protected from weather conditions. Water inside
the equipment can damage the electric circuit
of the motor, besides increasing the risk of an
electric shock.
If you need maintenance and spare parts, get in
touch with you local distributor or an authorized
technical assistant:
In case of further difficulties, get in touch with:
METALÚRGICA TRAPP LTDA.
Av. Pref. Waldemar Grubba, 4545 - Cx.P. 106
89256-502 Jaraguá do Sul - SC - Brasil
Phone: +55 47 3371-0088 / +55 47 2107-8800
Fax: +55 47 3371-1997
e-mail: trapp@trapp.com.br
27