the heating element or radiator.
6. Before installing or removing
the device, make sure it is dis-
connected from the power
source.
7. Do not open the device — any
interference with internal com-
ponents will invalidate the
warranty.
8. The heating element's power
output must not exceed the ra-
diators power output for the
parameters 75/65/20° C.
9. The pressure in the radia-
tor should not exceed 10 atm.
Make sure an air cushion is pre-
served in electric radiators, in
central heating systems leave
one valve open to prevent pres-
sure build up due to the ther-
mal expansion of the liquid.
10. The device is intended for
home use only.
11. Fitting and Installation of the
device must be carried out in
accordance with all local regu-
lations for electrical safety, in-
cluding installation in a permis-
sible location only, maintaining
bathroom electrical zones.
EN
23