TERMA SIM Manual De Instrucciones página 29

Warranty terms & conditions
1. The subject of this warranty is an elec tric heating element. The
product name and characteristics are specified on the packaging.
2. By accepting the device on purchase, the Client confirms that
the product is of full value. The Client should immediately inform
the Seller of any discovered faults — otherwise it will be under-
stood that the Product was faultless at the time of purchase. This
refers especially to any faults or damages of the control panel case.
3. The Warranty for period for the Product is 24 months from the
date of purchase, but no longer than 36 months from the date of
production.
4. Any claims made will be processed on production of the war-
ranty card and the evidence of purchase. The manufacturer has the
right to reject any claim on the grounds of failure to present any of
the above documents.
5. This warranty does not cover any faults that are due to:
— incorrect (not in accordance with the manual) installation, use
or disassembly,
— incorrect use of the heating element (i.e. for any purpose that
is not specified by the Manufacturer as intended for this type of
product),
— Product being handled by unauthorized persons,
— Fault's or damages caused by the Client after having purchased
and accepted the Product.
6. The Central Heating installation should be fitted with lock-shield
valves, enabling disassembly of the radiator or the heating element
and its control head without the necessity of emptying the whole
system of the heating agent. Any problems or expenses arising from
the absence of lock-shield valves in your installation cannot be used
as grounds for any claims against the Supplier or Manufacturer of
the device.
7. The attached Product Manual is an integral element of the War-
ranty. Please read it carefully prior to the installation and use of the
Product.
8. The Manufacturer is obliged to remove any production fault
within 14 working days of receipt of the faulty device at the Manu-
facturer's premises.
9. Should the repair be impossible, then the manufacturer is
obliged to replace the faulty Product with a new, full-value unit of
identical parameters.
EN
29