Panasonic VW-CLT2 Instrucciones De Funcionamiento página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not allow any insecticide or volatile substance to
get on the 3D Conversion Lens if they are used in
the surrounding area.
≥ Failure to observe this may result in deformation or
the coating peeling off.
Do not use solvents such as benzine, thinner,
alcohol, etc., for cleaning.
≥ Solvents may cause discoloration or damage.
≥ Do not touch or contaminate the surface of the
protective panel. Blow any dust off using a
commercially available blower brush and wipe gently
with a dry soft cloth if contaminated.
≥ Do not use any kitchen detergent or chemical treated
wipes.
When requesting a repair for the 3D Conversion
Lens, request a repair for the video camera as well,
as the cause of the problem may be in the video
camera.
∫ About 3D recording
Attach the 3D Conversion Lens securely. It must not
be used with an insecure attachment.
Be sure to perform the convergence adjustments
before use. Recording with a misaligned lens may
lead to eye fatigue or discomfort. The lens should
be aligned each time it is re-attached to the
camcorder body.
With the 3D Conversion Lens attached, do not
record a subject at less than the minimum focus
distance. Only record subjects that are beyond
1.2 m (3.9 feet).
≥ The 3D effects may be more pronounced, and
therefore cause tiredness or discomfort.
≥ The minimum focus distance is approx. 1.2 m
(3.9 feet).
When recording with the 3D Conversion Lens
attached, be careful not to shake the video camera.
≥ Tiredness or discomfort may result if the shake is
pronounced, due to riding in a vehicle or walking etc.
≥ When moving the video camera as you record, move
it slowly.
≥ We recommend using a tripod.
5
(ENG)VQT4A75

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido