Steiner NIGHTHUNTER 8x30 LRF Instrucciones De Uso página 8

User Interface
B1 = ON
Measurement and setting mode
Measurement range and accuracy:
The measurement range of the NIGHTHUNTER 8x30 LRF is between 25 meters/27 yds and 1,700
meters/1,860 yds. In this respect, the range depends on the weather conditions, the visibility and
reflection characteristics of the target:
Range:
Object colour:
Angle to the object:
Object size:
Atmospheric conditions:
Object structure:
15
Press and hold
for approx. 3 seconds
Hold, target the object
and release
Press and hold
for approx. 4 seconds
greater smaller
white black
perpendicular acute
large small
clear, homogeneous misty, inhomogeneous
e.g. house wall e.g. bush, tree
In the event of sunshine and good visibility, the following ranges and accuracies apply:
± 1.0m/yds up to 300m/328yds,
± 2.0m/yds up to 600m/656yds,
± 0.5% above 600m/656yds
Change from metres to yards
by pressing the B2 button. Saving and Auto OFF after 3 seconds
Individual measurement
Start a measurement in m/yds by pressing the B1 button
Scanning operation
Continuous measurements every 1.5 seconds
for a period of 20 seconds
B1
B2
GB
Auto OFF after 5 seconds
Auto OFF after 20 seconds
The display shows „----" if:
- the distance is less than 25 meters
- the distance is more than 1,700 meters
- the reflection characteristics
are insufficient
A low level of battery
is indicated by a flashing display
16