Protection Features - Seasonic X Serie Manual De Usuario

Protection Features

Your Seasonic power supply is equipped with important protection features to ensure safe and secure operation of your PC system.
Should any electrical fault, either from within the system components or from the AC input occur, one or more of the protection circuit will initiate
and shut down the power supply to ensure your system is protected from electrical damage.
1. Over Current Protection (OCP) –
Monitors the +12V, +5V &+3.3V to ensure the current on each output rail does not exceed the specified limits.
2. Over Power/Load Protection (OPP/OLP) –
Monitors the +12V, +5V & +3.3V to ensure that the DC output power does not exceed the specified limits. The power supply monitors the total
output to maintain under the limits of max.150% .
3. Over Temperature Protection (OTP) –
Various sensors are placed at critical components within the power supply to ensure the temperature of the components does not exceed the
limits of the component and of safe operation temperature limits of the power supply.
4. Over Voltage Protection (OVP) –
Monitors the +12V, +5V & +3.3V to ensure that the DC output voltages do not exceed the specified limits.
5. Under Voltage Protection (UVP) –
Monitors the +12V, +5V & +3.3V to ensure that the DC output voltages do not go under the specified limits.
6. Short Circuit Protection (SCP) –
Monitors the power supply for any output "short-circuit" or is accidentally "short" to ground, such as in a situation where the output impedance is
less than 0.1 ohms.
ATTENTION! This power supply complies with the newest ErP 2013 requirements. For proper system function please update your main-board
BIOS to the newest version and configure the BIOS in accordance to ErP 2013 requirements - enable all Energy Savings functions for standby and
normal operations and disable audio always-on. Please consult your motherboard manufacturer for further assistance.
58