Optional Accessories - Dolmar MC-CS1 Manual De Instrucciones

TROUBLESHOOTING
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the machine. Instead, ask Dolmar/Makita Authorized Service Centers, always using
Dolmar/Makita replacement parts for repairs.
State of abnormality
Motor does not start.
Motor stops soon.
Motor speed does not increase.
Rotor blade does not rotate.
Stop the motor immediately.
Power unit vibrates abnormally.
Stop the motor immediately.
Rotor blades continue to rotate even
if the switch trigger/lever is released.
Stop the motor immediately.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attach-
ments are recommended for use with your Dolmar
tool specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Dolmar Service
Center.
• Rotor blade set (L/R)
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Probable cause (malfunction)
-
-
-
The pipes of the power unit and the
cultivator attachment are not connected
properly.
Rotor blade caught a root or the like.
Abnormal drive system
Broken or bent rotor blade
Loose attachment of the rotor blade
Irregular attachment of the rotor blade
Abnormal drive system
The power unit does not work properly.
10 ENGLISH
Remedy
Refer to the instruction manual of the power unit.
Refer to the instruction manual of the power unit.
Refer to the instruction manual of the power unit.
Connect the pipes in the correct way.
Remove foreign matter
Contact an authorized service center for repairs.
Replace the rotor blade.
Tighten the screws on the rotor blade securely.
Install the rotor blade in the correct way.
Contact an authorized service center for repairs.
Adjust the idle speed if the power unit is engine-op-
erated. Contact an authorized service center for
repairs.