Technical Specifications; Operating Instructions - CEVIK CE-PE400S Manual De Instrucciones

EN

TECHNICAL SPECIFICATIONS.

Light shade.
Dark shade.
Grinding.
Switching time from light to dark. (Seconds).
Switching time from dark to light. (Seconds).
Sensitivity.
Power supply.
Inside viewing area.
Outside viewing area.
ON/OFF System.
UV & IR protection.
Arc sensors.
TIG Capability.
Optical class.
Operation temperature.
Material of helmet.
Net weight.

OPERATING INSTRUCTIONS.

1. Peel off the protective film inside and outside the surfaces of lens.
2. Prior to welding, the filter screen is in transparent and clear state (light green colour),
enabling a clear vision on work piece, at moment of starting welding, it automatically
changes the filter screen from clear to dark state. At the moment of stopping welding,
the filter screen automatically changes from dark to clear state.
3. Adjust the operation mode with selector (6) on helmet side, Welding (9-13) or Grinding
(Grind). While operating in Grinding mode, the filter do not react to welding arc and
keeps clear.
4. Adjust the shade number knob according to different welding current and welding
process to select proper shade number. (See table 1).
5. Adjust the headgear. Put he helmet on the head, press the adjustable knob down (at the
rear head position), at the same time, rotate the knob counterclockwise to increase the
circumference of the headband, or rotate the knob clockwise to decrease the
circumference. Adjust the angle behind your head to suit your headform. (See figure 1).
6. Adjust the deep of helmet to best position. (See figure 2). As a result of above
mechanism action, the welder surely feels more comfortable tan before and are in
working with more high proficiency at any time.
1/15.000, room temperature.
Photovoltaic and battery.
101,7x46,5mm.
From 5º C to 55º C.
Polyamide, ABS, Polypropylene, cotton
17
DIN 4.
DIN 9-13.
Grind.
0,1-1,0.
Authomatic.
114x87mm.
Authomatic.
DIN 16.
2
> 20 ampers.
1/1/1/2.
and sponge.
480 grams.