Intermec SF51 Manual De Instrucciones página 3

SF51 1-Bay Charger Instructions
The SF51 1-Bay Charger (Model 074645) is an accessory for the
SF51 Cordless Scanner. These instructions explain how to install
and use the charger.
To use the charger you also need a 1-bay AC power supply (P/N
851-086-xxx) (sold and ordered separately) with these AC power
adapters: Australia; Continental Europe; North America, Central
America, Mexico, and Japan; United Kingdom; flat plate (for use
with an AC power cord, not included).
To install the charger (optional), you need mounting hardware
appropriate for the thickness of the mounting surface.
To prevent fire or electric shock, do not expose the
battery charger to rain or moisture.
You must use the appropriate Intermec power
supply with this device or equipment damage may
occur.
Installing Horizontally
1 Using the provided mounting template, mark and drill two
holes in the mounting surface.
2 Connect the AC power supply to the power connector on the
charger, and route the cable through the cable feed.
Power
connector
Cable
feed
3