Setting The Alarms - Tokai TCP-137 Manual De Instrucciones

DISPLAY DESCRIPTION AND INDICATORS
PM Indicator
STANDBY Indicator
ALARM 1 Indicator
TO SET CLOCK MANUALLY:
1. Press and hold the (8) SET Button in standby mode and keep
depress over 3 seconds to enter time set mode. The year display
will flash.
2. Turn the (12) rotary set dial to adjust the year.
3. Press the (8) SET Button. The date display will flash.
4. Turn the (12) rotary set dial to adjust the date and press the SET
button. The clock display will flash.
5. Turn the (12) rotary set dial to adjust the clock and press the SET
button the clock setting is complete.
Note:
- Press / Tune - button (4) to adjust data backward.
- Press / Tune + button (5) to adjust data forward.
- Keep depress
forward.

SETTING THE ALARMS:

1) Press and hold the (6) alarm 1 or (7) alarm 2 Button until the alarm
time flashes.
2) Turn the (12) rotary set dial to set the desired alarm time, weekday
alarm, alarm wake beep, alarm wake radio, wake radio volume.
Press the alarm button the setting is complete.
Note: select alarm weekday mode as follows:
1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
1-1 : One day of week
TIME Indicator
or button for 3 seconds to enable auto
16
ALARM 2 Indicator