Primux Beta Manual Del Usuario página 59

Set unlock pattern
1. Click Setting in the main interface.
2. Click Security.
3. Click Lock screen.
4. Select Pattern in the popup window.
5. Select Next according to the prompt.
6. In the popup unlock pattern interface, there are 9 touch points. Connect at least 4 points in the vertical,
horizontal or diagonal directions, as shown in figure 4.10. The system will record your pattern when you
finger removes from the screen.
7. Click Continue.
8. When you see the prompt, draw the pattern again, and click Confirm.
Set unlock PIN
1. Click Setting in the main interface.
2. Click Security.
3. Click Lock screen.
4. Select PIN in the popup window.
5. Enter the new PIN (numbers) and click Continue.
6. Enter the new PIN again and click Confirm.
Set unlock password
1. Click Setting in the main interface.
2. Click Security.
3. Click Lock screen.
4. Select Password in the popup window.
5. Set number password (letters or numbers) and click Continue.
6. Enter the new password again and click Confirm.
Figure 4.10
58