König Electronic MP3-FMTRANS40 Manual De Uso página 2

Set up
1. Insert the 12-24V adaptor-end of the modulator into your vehicle's cigarette lighter receptacle or power
port.
2. Adjust your FM radio's frequency same to the modulator's (87.5 – 108.0 Mhz). Make sure the frequency
you chose is not being used by any local radio station.
3. Use the "A-" and "B+" button to set modulator's transmitting frequency too match your radio's
Using the Audio Input Jack
1. Insert a 2.5mm plug in to the jack on the side of the FM transmitter.
2. Turn on the device connected to the modulator, then insert the 12-24V adaptor-end of the modulator into
your vehicle's cigarette lighter receptacle or power port.
3. Adjust your FM radio's frequency same to the modulator's. The playing music from the connected device
is being transmitted to your radio and come out from the speakers of the car.
What is what:
A: USB/SD indicator
B: Song number
C: Frequency
D: File name
E: Input jack
F: USB port
G: SD memory card slot
DIGITAL REMOTE CONTROL:
1. A- and B+ buttons adjust frequency. Also the buttons 0---9 on the remote control can be used. E.G. if you
want to set the transmitting frequency as 106.9 Mhz, just press the CH SET button and then 1,0,6.9 in
turn, and press CH+ or CH+ to finish setting.
2. Previous / Next track button to select the song to play. Also can be selected on the remote control. E.G if
you want to select song 16, just press the key button PICK SONG and then 1,6. The song 16 is selected.
ENGLISH
1: Display
2: Play/Pause button
3: Previous song button
4: Next song button
5: Frequency down button
6: frequency up button
2