britech BT 46/ 40 CS Manual De Instrucciones página 37

1
Fig.26
Fig.27
Fig.29
1
CHAIN SAW OPERATING MANUAL
1
Fig.28
2
3
Do NOT start the chainsaw hold-
STOP
ing it with the hand alone
ATTENTION to the possibility of the
chain moving.
7) Fully press down the air knob (choke) (fig.
30), so that the "THROTTLE ADVANCE"
remains engaged.
8) Continue to pull the starter cord (fig. 29) until
the engine starts.
CAUTION-HAZARD! The cutting chain
moves because the throttle trigger is
partially advanced.
- Hold the chainsaw firm (Fig.29) letting the
engine and chain run for at least 15 seconds
(for pre-heating).
2
GB
Fig.30
1
37