Battery - Powerbuilt 641653 Manual De Instrucciones

Do not carry battery packs in aprons, pockets, or tool boxes, product kit
boxes, drawers, etc. with loose metal objects. Battery pack terminals could be
short circuited causing damage to the battery pack, severe burns or fire.
The battery pack is Lithium-Ion (Li-Ion) and is considered to be a toxic material
by the Environmental Protection Agency. Before disposing of damaged or worn out
Li-Ion battery packs, check with your State Environmental Protection Agency to find out about
special restrictions on the disposal of these battery packs, take them to your local recycling
center for proper disposal, or call 1-800-822-8837.
The battery is not fully charged. Before first use, the battery pack requires 3-4 hours
charge time to be fully charged.
Always switch to a fresh battery when tool performance begins to diminish.
Severe heat is most destructive to a battery; the more heat generated, the faster the battery
loses power. A battery that gets too hot can have a shortened life.
When tool performance begins to diminish, stop the tool and recharge the battery for
optimal performance.
Charge battery pack at ambient temperatures between 50° F – 104° F.
Store tool and battery pack in locations where temperatures will not exceed
120°F. This is important to prevent serious damage to the battery cells.
The battery pack should always be recharged when the Cordless Drill begins to
run slowly.
When battery pack is not in use, keep it away from other metal objects such
as paper clips, coins, keys, nails, screws or other small metal objects that
can make a connection from one terminal to another. Shorting the battery terminals
together may cause sparks, burns, or fire.
Before using battery pack, please read carefully all instructions
and cautionary markings on battery pack, battery charger and
product using battery.
Do not incinerate the battery pack even if it is severely damaged
or is completely worn out. The battery pack can explode.

BATTERY

10