Care And Maintenance - Radiodetection RD8100 Guia Del Usuario

SideStep
SideStep allows you to change the output frequency on the transmitter. SideStep
changes the selected frequency by several Hertz and automatically sets the locator's
locate frequency to match the transmitter's output frequency.
1. On the locator, select the frequency you want by pressing the
frequency is displayed on screen.
2. To step the frequency, press and hold the
3. Press the key to send the SideStep command to the transmitter.
4. If the command is sent successfully, an asterisk (*) will appear on the locator next to
the frequency and STEP will appear on the transmitter below the frequency.
5. To return to the standard locate frequency, press and hold the
asterisk (*) has been removed from the display, press the
command to the transmitter
CALSafe
GPS equipped RD8100 locators models are equipped with a system which can be
enabled to force them to shut down once they are beyond the expected service /
calibration date.
When the unit is within 30 days of the service due date the unit will display at startup the
number of days left. The locator will stop functioning on the service due date.
CALSafe is disabled by default. You can enable the CALSafe feature and edit the
CALSafe service / calibration due date using the RD Manager PC software. Refer to the
RD Manager operation manual for further information.
Training
Radiodetection provides training services for most Radiodetection products. Our qualified
instructors will train equipment operators or other personnel at your preferred location or
at Radiodetection headquarters. For more information go to www.radiodetection.com or
contact your local Radiodetection representative.

Care and maintenance

The RD8100 locator and transmitter are robust, durable and weatherproof. However you
can extend your equipment's life by following these care and maintenance guidelines.
General
Store the equipment in a clean and dry environment.
Ensure all terminals and connection sockets are clean, free of debris and corrosion and
are undamaged.
key until the
key until STEP appears on the LCD.
key. Once the
key to send the
26
Do not use this equipment when damaged or faulty.
Batteries and power supply
Only use the rechargeable battery packs, chargers and power supplies approved by
Radiodetection.
If not using rechargeable packs, use good quality Alkaline or NiMH batteries only.
Batteries should be disposed of in accordance with your company's work practice, and/
or any relevant laws or guidelines in your country.
Cleaning
WARNING! Do not attempt to clean this equipment when it is powered or
connected to any power source, including batteries, adapters and live cables.
Ensure the equipment is clean and dry whenever possible.
Clean with a soft, moistened cloth. Do not use abrasive materials or chemicals as they
may damage the casing, including the reflective labels. Do not use high pressure jets of
water to clean the equipment.
If using this equipment in foul water systems or other areas where biological hazards may
be present, use an appropriate disinfectant.
Software upgrades
From time to time, Radiodetection may release software upgrades to enhance features
and improve performance of the RD8100 locator or transmitter. Software upgrades are
free of charge and provided through the RD Manager PC software
E-mail alerts and notification of new software releases are sent to all registered users. You
can also check if your products are up-to-date or upgrade them by using the RD Manager
software upgrade screen.
NOTE: To upgrade your product's software you need to have created an account
using RD Manager and have a live internet connection. An optional Radiodetection
power supply may be required to update your transmitter software.
Disassembly
Do not attempt to disassemble this equipment under any circumstances. The locator and
transmitter contain no user serviceable parts.
Unauthorized disassembly will void the manufacturer's warranty, and may damage the
equipment or reduce its performance.
27