Pinolino Anja Instrucciones De Montaje página 4

IMPORTANT -
CAREFULLY! -
KEEP FOR FUTURE REFERENCE
Dear clients,
We are glad that you have chosen this premium product made of solid wood. We, the Pinolino staff, have manufactured this item
with greatest care. In doing so, we have exclusively used European timbers from certified forest stands. The lacquers, oils, glues and
fabrics that were used are eco-friendly and comply with the strict European safety standards.
To spare you unnecessary effort, carefully read the assembly instructions first. Check whether you have all the parts and study the
illustrations carefully before you start the assembly. Improper handling or assembly and especially construction alterations will
void all warranty claims.
THIS ADD-ON-BED COMPLIES WITH THE EUROPEAN NORMS: EN 1130-1, EN 1130-2.
Safety requirements:
Please check regularly that the screws are well tightened. The screws can loosen, leading to snag points or objects getting caught.
Please use only the enclosed hex key and a screwdriver for the assembly. To avoid damaging the product, do not use an electric
screwdriver for tightening the screws!
Please note:
Use only original accessories and spare parts from the producer or from the providers. Plastic bags and other plastic elements /
wrappings should be removed immediately and kept out of the reach of children!
Assembly instructions:
Please take into consideration that the parts should be assembled on an even, flat surface. Make sure that the article is not inclined.
In order to protect the article and the floor, we recommend using the packaging of the article as underlay during the assembly.
Warning:
Do not use the add-on-bed if single parts are missing, broken or torn. Use only original spare parts recommended by Pinolino. To
prevent the child from falling out, the add-on-bed should no longer be used if the child is able to climb out of the add-on-bed.
Warning:
Objects that can serve as footholds, or ones that present the hazard of suffocation or strangling, e.g. laces, drapery or curtain
chords etc., must not be left inside the add-on-bed.
The mattress must be chosen so that the depth of the add-on-bed (mattress upper surface to top edge of the bed frame) will be at
least 20 cm.
Warning:
Never use more than one mattress in the add-on-bed.
Warning:
Make sure that the add-on-bed is not in the close proximity of open fires or strong heat sources, e.g. electric heaters, gas stoves.
Keep the assembly plan and the hex key for future disassembly or assembly.
Maintenance:
Wipe with a dry leather or with a soft cotton lint-free material. Also find details on www.pinolino.de.
What else you should know:
The add-on-bed is made of solid wood. Wood is a natural product; irregularities in structure or colour are typical features of this
natural product and will thus not constitute a flaw.
In producing our furniture and toys we only use oils, varnishes and glazes that do not pose a health hazard and are appropriate for
children's furniture. As a result of the production process, new furniture can sometimes retain a specific odour. To counter this
harmless inconvenience we recommend repeated venting.
For service cases:
If, despite constant supervision of the production process, a flaw should turn up, please mark the respective part clearly in this
assembly plan. Print the Customer Service contact form from our website, www.pinolino.de. Shortly describe the flaw or the
problem. Send the complete assembly plan, a copy of the receipt and the Customer Service contact form, which you have filled in,
with the specification of the serial number (it can be found on the packaging, on the assembly instructions and on the article), to our
address below.
4
PLEASE READ
3
1 x
THV1
4
2 x
THV
2 x
W 6,9/12 und
2 x 1 x
VS 3,5/25 WI 5
1 x
THV1
2 x
VF 6/55
2 x
VF 6/55 und
• and • et • y • e • en • and • et • y • e • en
1 x
WI 4
13