Descargar Imprimir esta página

Tristar WG-2422 Manual De Usuario página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Operation and maintenance
Remove all packaging of the device.
Only use the scale on a hard and flat surface. When you are measuring, please keep
standing still on the weighing platform.
It is advisable to take measurement at the same time of the day and at the same place.
Always remove your shoes and socks, it is advisable to discard as many as possible
clothing, wipe clean your feet before using.
Step on the weighing platform gently and when you are measuring, please keep still.
Measured results could be misleading after intensive exercise, excessive dieting or
under extreme dehydration condition.
The measured data of the following people may have deviation:
Adults over 70 years old, body building athletes or other occupational athletes.
Note: Children under the age of 10 years or adults over the age of 100 years should use
the device under normal weighing mode.
People with the following conditions should not use the device: pregnant women, those
with symptoms of edema, those on dialysis treatment and those who use a heart
pacemaker or with any other implanted medical devices.
The fat% hydration% content evaluated by the fat monitor scale is only for
reference (not for medical purpose). If your fat% hydration% content is over/below
normal level, please consult your doctor for more advice.
Keep away from strong electro-magnetic field when using the scale.
It could be slippery if you weigh on a wet surface. Moreover, the weighing platform
surface is glazed, never step on the edge of the scale and do keep balance
duringyour weighing. Always place your dry bare feet central on the stainless steel
colored parts on the glass plate otherwise the device will may have failures.
First use
Remove the battery compartment cover at the back of device and attach new battery onto
the 9-volt battery snaps .Please check the polarity(See PIC3).
Your scale is available(or applicable) in kg/lb/st, you can set to the one you prefer
by pressing the unit conversion button. Press the unit conversion button when the scale is
powered off, the LCD display shows the current weight unit. Press the button again to convert
the weight unit.
-When setting lb/st as weight unit, the
default height unit is feet/inch;
-When setting kg as weight unit, the default
height unit is cm.
Optional normal weighting mode
Step on the weighing platform gently, the balance starts automatically, please keep still and
wait for a few seconds, the weight indicator flashes on the screen, this is your weight.
After digits stabilize, more additional loadings can be conducted. Ensure each add-on loading
has to exceed 2kg to get a new reading. Example: If you want to get a weighing value of your
11
baby, you can weigh yourself first, and then hold your baby together, without stepping off the
UK
scale. Then you will get the total weight.
Fat/hydration/muscle/bone/calorie/measuring mode
LCD Display
Key Illustration
ON/SET
START
Before you can use the extended measurement, you must first program your personal settings.
This can be done for 12 different people. Remember always your own user-ID!
At the first time when you install battery and switch on, all default parameter are set as follow:
Gender
Man
Parameters can be set in the following range:
Memory
1-12
For
turning on the scale and to set up the menu.
Advance the value by one interval each press.
Continuous pressing will speed up the advance of value.
Decrease the value by one interval each press.
Continuous pressing will speed up the advance of value.
Start measuring
Height
Age
165 cm/5'05.0"
25
Gender
Height
Age
Man/vrouw
100-250cm
10-100
3'03.5"-8'02.5"
12

Publicidad

loading