INSTRUCTIONS BEFORE USE
When use for the first time, please take out all accessories from the cooker body, read
the User Manual carefully, particularly for the usage and cautions for avoiding
property loss or physical injury for you.
OPERACIÓN DE LA OLLA
Delay Timer Button
Button"-"
Manual Setting Button
DISASSEMBLE AND INSTALL THE BLOCK PROOF COVER AND SEAL RING
Disassemble Pull it out Install Press it down
Disassemble
and install the
block proof
cover
Disassemble Pull it out Install Press it down
Disassemble
and install
the seal ring
USE AND MAINTAIN THE STAINLESS STEEL INNER POT
1.Do not empty
It may cause yellowish and spotted inner pot or distorted bottom if it is empty for a
long time.
2.Do not use it to store the acid, alkali and preserved foods for a long period
Although the inner pot has excellent anti-corrosion performance, it may cause
corrosion of certain degree, the suggested time of keep warm shall not exceed 2h.
3.Keep it clean to prolong the service life Do not immerse it in water for a long period.
Clean the inner pot with soap, weak detergent or warm water to remove dust, oil and
dirt.
4.Do not scratch it with steel shovel
Soften the burnt foods on the bottom with water and then remove it.
Tips:
The bright inner pot has smooth and polished surface before use.After using for a
long period, the surface will become unclear with signs after it is washed with hard
object. It is normal and won't influence the function of the product.
Keep Warm Button
Cooking Timer Button
Display screen
Button
Menu Botton
Menu Function
Panel
Olla Multiuso
TMU060310MD
Optional pressure maintaining function
This function allows setting the pressure
maintaining time according to the
personal requirement, the pressure
maintaining time is adjusted by pressing
"+"/"-"button.
Cooking Timer Function
If the pressure maintaining time is
adjusted by pressing "+"/"- "button, it
requires entering into the "Manual
Setting" state.
DelayTimer Function
Set the time of starting cooking by
pressing the "+"/"-" button.
1.Check if the seal ring and block proof
cover are correctly installed in the upper
cover before use each time.
2.After use, please clean the seal ring
and around of block proof cover for
avoiding jamming the cover, keep it
clean to avoid bad odor.
3.Please do not pull the seal ring,
otherwise, the distorted seal ring may
influence the seal ring and pressure
effect.
4.Do not use the damaged seal ring,
please replace it at the authorized repair
office.