Prepare For Cooking - Telstar TMU060310MD Manual Del Instrucciones

PREPARE FOR COOKING

Opening the lid correctly
Hold the handle of upper cover, turn it anticlockwise
for about 30°till the " " mark on the edge of the
upper cover aiming at the" " mark on the edge of
the housing cover, and then lift the upper cover.
Check if the parts and accessories of lid are well
installed
Check if the floater valve and exhaust valve are
jammed, confirm if the sealing ring and block proof
cover are well installed.
Take out the inner pot, put the foods and water
into the inner pot
The total amount of foods and water shall not
exceed the Max marked on the inner pot. The max
rice and water amount when cooking shall not
exceed the Max on the inner pot.
Put the inner pot into the cooker
Wipe to clean the external surface of inner pot,
foreign object and water are not allowed on the
inner surface of electric pressure cooker;
Turn the inner pot to left and right to ensure good
contact with the heating plate.
Safely close the lid
Before closing the lid, check if the sealing ring is well installed.
Hold the handle of upper cover, aim the " "mark on the edge of the upper cover
aiming at the " "mark on the edge of the housing cover, put the top cover horizontally
on the cooker body, turn the upper cover clockwise for about 30°to the lock place,
and aim the " " mark on the edge of the housing cover at the " " mark on the lid.
Put the exhaust valve well
When working, please turn the exhaust valve to the sealing place, which means the
electric pressure cooker keeps at sealing state; For manual exhaust, please turn the
exhaust valve handle to the exhaust place, the electric pressure cooker keeps at the
exhaust state; when exhausting, do not keep the hands or face above the exhaust
opening; Check if the floater valve drops down before working (before heating, the
floater valve is down).
Olla Multiuso
TMU060310MD
Sealing schematic Exhaust schematic
diagram diagram