AEG NT 1200 Instrucciones De Uso página 4

Assembling the
machine
Mounting the
undercarriage
Fit the motor
section
Connect the
vacuum hose
Connecting the
accessories
All-purpose
nozzle
Upholstery
nozzle
Power tools
ENGLISH
Always disconnect the plug from the socket before carrying out any work on the
machine.
1.
Open the snap-open grip and lift out the
motor section. (The container can only be
stood on its head for the castors to be
mounted.)
2.
Press the castors and the respective bolts
firmly by hand into the provided borings of
the container base, as far as they will go.
NT 1200: 4 castors
NT 1500 A: 5 castors
3.
Fit the motor section such that the On/Off
switch is located above the aspiration hole.
4.
Snap shut the grips.
5.
Press the vacuum hose into the connector
with the markings lined up to one another,
and listen for the hose to snap into place.
To remove the vacuum hose, turn the
connector slightly to the right or the left
and pull it out.
The vacuum cleaner can be connected with several accessories res. with a power
tool.
Fit together the all–purpose nozzle, the
two suction tubes, and the suction hose.
Fit the upholstery nozzle directly onto the
vacuum hose or onto one of the vacuum
tubes.
Connect power tools with the adapter onto
the vacuum hose.
Connect the mains cable of the power tool
with the socket of the vacuum cleaner. In
automatic operation, the vacuum cleaner
starts automatically when the power tool is
switched on.(only applicable for
NT 1500 A).
3
NT 1200, NT 1500 A