Setting Menu - Fonexion ideus ITCOMBO100 Manual De Usuario

ITCOMBO100
2
INSTALLATION
Base
Plug the main power lead and the telephone line cord into the bottom of the base unit.
Plug the main adapter into mains socket with the switch on the socket set to off.
Switch on main power at the socket.
Connect the base unit to telephone wall socket by a telephone line.
Handset
Plug the main power lead into the back of the cradle.
Plug the main adapter into mains socket with the switch on the socket set to off.
Switch on main power at the socket.
Fit the batteries in the handset.
To powering up the handset, place it on the charging cradle or press and hold the
SWITCH OFF key.
NOTE
If you do not modify the password yourself, all the passwords in this manual are default as
0000.

SETTING MENU

Base Menu Setting
In standby mode, press MENU key to enter the menu setting, there are four sub-menus under
the base menu item.
PHONE BOOK
CALL LOG
SETTINGS
REGISTRATION
Noted: when the unit is powered on initially, the date and time will be blinking, please to set the
date and time first according to use the method of "DATE and TIME"
Press ▲/CID or ▼/OUT key to select the above items and press MENU key to confirm the
selected item, after one item setting, you can press PHONEBOOK key repeatedly to standby
mode. Details of each item are shown in next parts :
BASE Menu function 1: PHONE BOOK
Each individual BASE has its own phonebook, there are 50 phone book memories that can be
viewed and dialed out, each name a maximum of 12 characters, each number a maximum of
20 digits and a melody selected from 1 to 10. Press MENU key and press ▲/CID or ▼/OUT key
to select PHONE BOOK. Then press MENU key to confirm and enter.
LIST
The function allows the user to review the phone book records by pressing ▲/CID or ▼/OUT
key and user can also make a call form phonebook.
32
EN
USER GUIDE