Wifi Function - Pur Line NTW-15 Manual De Instrucciones

power stops and the low temperature power remains active. When room temperature
is 2 degrees over the set temperature, both the high and lower temperature powers
will stop operating. The machine will begin operating again only when temperature
decreases 2 degrees with respect to the set temperature.
Timer
The timer button can be set to start or stop the appliance at the desired time, with a
time interval between 1 hour and 24 hours.
Child Lock (remote control)
Press the Child Lock button for 3 seconds, the device is locked and can be turned on.
After pressing the button for 3 seconds again, the device is unlocked.
When there is no remote control, you can press the
seconds to lock or unlock the display.

WiFi Function

1. Use your phone to scan the QR code below or search "Tuya Smart" in
App market.
2. Select your country code, enter the cellphone number and tap "Get" to
get a message containing verification code.
3. Enter the verification code in the message and tap"Login" to login the
App.
4. Go to the App, tap "add device" at the bottom (1).
5.There are two connection methods for the App (hotspot mode and quick connect mode). The quick connect
mode is the default. Users could tap the upper right corner to switch the connection method to hotspot mode.
a. For quick connect mode, please make sure the device's instructor light quickly flashes.
b. For hotspot mode, please make sure the device's instructor light slowly flashes.
c. If the light is not flashing as the status as above described, please long press the device's reset button
for 5 seconds or longer until it flashes.
6. Select the Wi-Fi, enter password and tap "Next" (pic 2).
For quick connect mode, the App interface will go through the changes during the network configuration
process (pic 3). Picture 4 shows the interface when the device is connected successfully.
EN
button on the device for 5
11
pic 1