GBC StreamPunch Ultra Manual De Instrucciones página 12

StreamPunch Ultra Die Sets
The StreamPunch Ultra uses a variety of easily interchangeable die sets that allow you to punch documents in line for several different binding
styles. By selecting the appropriate die set, you can use your StreamPunch Ultra to punch documents in any of the following binding styles.
TM
DuraGlide HD die sets are shown in bold where available.
Die Set Description
For Plastic Comb Binding:
1
PB Plastic Bind; Hole Size: 8mm x 2.9mm (0.313" x 0.116") (LxW); Center-to-Center Hole Spacing: 14.3mm (0.563")
For Twin Loop™ Binding:
1
W3 Wire; Square; 3 Holes per inch; Hole Size: 4mm x 4mm (0.156" x 0.156") (L x W); Center-to-Center Hole Spacing:
8.5mm (0.333")
1
W2 Wire; Rectangle; 2 Holes per inch; Hole Size: 6.4mm x 5.4mm (0.250" x 0.214")(L xW); Center-to-Center Hole Spacing:
12.7mm (0.500")
1
eWire; Square; 3 Holes per inch; Hole Size: 5mm x 5mm (0.197" x 0.197") (L x W); Center-to-Center Hole Spacing:
8.5mm (0.333")
1
W3 Wire; Round; 3 Holes per inch; Hole Size: 4mm (0.158") Diameter; Center-to-Center Hole Spacing: 8.5mm (0.335")
1
W2 Wire; Round; 2 Holes per inch; Hole Size: 6.5mm (0.0.256") Diameter; Center-to-Center Hole Spacing: 12.7mm (0.5")
1
eWire; Round; 3 Holes per inch; Hole Size: 5.5mm (0.217") Diameter; Center-to-Center Hole Spacing: 8.5mm (0.333")
For Color Coil™ Binding:
1
C4 Coil; Round; 4 Holes per inch; Hole Size: 4.4mm (0.174") Diameter; Center-to-Center Hole Spacing: 6.3mm (0.2475")
1
C4 Coil; Oval; 4 Holes per inch; Hole Size: 4mm x 5mm (0.158" x 0.197") (L x W); Center-to-Center Hole Spacing: 6.3mm
(0.2475")
®
For Velo Bind:
1
VB Velobind ® ; Round; 1 Hole per inch Hole Size: 3.2mm (0.125") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")
1
VB Velobind ® ; Round; 1 Hole per inch Hole Size: 3.2mm (0.126") Diameter; Center-to-Center Hole Spacing: 25.4mm (1")
For Loose Leaf Binding:
1
3 Ring Binder; U.S. (Standard Loose-leaf Patterns); Hole Size: 8mm (0.316") Diameter
1
3 Ring, 5 Ring, 7 Ring; U.S. (Standard Loose-leaf Patterns); Hole Size: 8mm (0.316") Diameter
1
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 8mm (0.315") Diameter
1
4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 6.5mm (0.256") Diameter
4 Ring Binder; Scandinavian (Standard Loose-leaf Patterns); Hole Size: 6.5mm (0.256") Diameter
©2016 GBC, Lake Zurich, Illinois - All rights reserved.
* When the Plastic Comb binding die is used in the 21 hole configuration on A4 width paper (297mm), there is the potential for the outer edge of holes 1 and 21 to be torn. The theoretical
paper edge should be 1.62mm from the edge of the sheet. This event is dependent on paper type, paper width and hole alignment optimization. To avoid this issue, it is recommended to
use a 20 hole configuration instead. 20 hole comb binding supplies are commonly available from GBC and other manufacturers and are considered more optimal than the 21 hole
configuration.
StreamPunch
19-LTR 21-A4
32-LTR 34-A4
21-LTR 23-A4
34
32-L TR 34-A4
21-LTR 23-A4
34
44-LTR 47-A4
44-LTR 47-A4
11
12
3
7
4 4
4
Graphics do not represent actual punch pattern dimensions or spacing.
Ultra/Ultra MP
TM
RICOH Part Number
Die, RICOH, Comb Bind
Die, RICOH, Comb Bind, HD
Die, RICOH, Wire 3.1, Sq.
Die, RICOH, Wire 2.1, Sq.
Die, RICOH, eWire, 3:1, Sq.
Die, RICOH, Wire, 3:1, Rnd.
Die, RICOH, Wire, 2:1, Rnd.
Die, RICOH, eWire, 3:1, Rnd.
Die, RICOH, Coil, Rnd.
Die, RICOH, Coil, Rnd, HD
Die, RICOH, Coil, Oval
®
Die, RICOH, Velobind , 11 Holes, Ltr.
®
Die, RICOH, Velobind , 12 Holes, A4.
Die, RICOH, 3 Hole, 8mm
Die, RICOH, 3 Hole, 8mm, HD
Die, RICOH, 3/5/7 Hole, 8mm
Die, RICOH, 4 Hole, 8mm
Die, RICOH, 4 Hole, 6.5mm
Die, RICOH, 4 Hole, Scan
GB
404767
409059
404769
404768
404770
404759
404758
404772
404757
409057
404771
404765
404766
404760
409058
404761
404762
404763
404764
12