Storing The Electric Blanket - Imetec 804A1 Instrucciones De Uso

TUMBLE DRYING
• Tumble dry at a moderate temperature.
• Remove the electric blanket from the tumble dryer at the end of the drying cycle and hang it out
EN
to dry completely.
• Do not use the electric blanket until it is completely dry.
AIR DRYING
ATTENTION! Lay the electric blanket without applying pegs so
as to avoid damaging it.
• Let the electric blanket dry flat by laying it out so that it roughly reaches its original size. The best
results are obtained when it is still damp, pulling a panel at a time from one end to the other. This
may have to be repeated a number of times until the electric blanket is completely dry.
• Do not use the electric blanket before it is completely dry.
ATTENTION! Check the electric blanket to verify that the
internal wires are not bent or twisted. It is easier to check
the wires by placing the electric blanket against the light.
ATTENTION! If problems arise with the internal wires after
having laid the electric blanket flat or if it does not return
to its original shape and original dimensions, return it to an
authorised technical assistance centre for a safety check.
Store this appliance as follows when not used:
When you store the appliance, let it cool down before folding it.
• Wait for the electric blanket to be completely dry if previously washed.
• Fold the electric blanket like a normal blanket.
• It is recommended to place the electric blanket in the package provided upon purchase for better
storage.
• Store the electric blanket in a dry place.
ATTENTION!
objects on top of it which crease and/or deform it.
The fabric might naturally yellow over time. This will not affect the safety and/or performance of the
product in any way.
14

STORING THE ELECTRIC BLANKET

When you store the appliance, DO NOT place