GB
6 Starting up
6.1 Assembly
6.2 Handheld unit
28
Instruction Manual
Attachment of the motorized power brush
Inserting the battery
Remove the handheld unit from the main unit.
Insert the battery in the designated recess on the back
side of the handheld unit and push until you hear it click
into place.
Assembling the charging station
Place the narrow part of the charging station into the
base and push until you hear it click into place.
The mains cable socket is on the back.
Press the release button
the handheld unit. Now you can attach the various
accessories (2in1 combi brush, crevice nozzle etc.).
To replace in the main unit, remove any accessories and
place the lower end of the handheld unit in the designa-
ted recess, pressing down on the handle until you hear it
click into place on the main unit.
on the handle and remove