Connection And Installation Of The Electric Winch - DRAGON WINCH DWM 8000 HD Instrucciones De Uso

connEcTion and insTaLLaTion
oF ThE ELEcTric winch
iMPorTanT
i
Individual winch models should be connec-
ted in different ways. The model is indica-
ted on every winch and the connection has
to be performed according to the indicated
model.
i
iMPorTanT
When tightening the power wires always lock
a lock nut with another spanner.
iMPorTanT
i
In order to correctly match the winch to the
vehicle type, please contact the manufac-
turer or retailer. Once the winch is appro-
priately matched to the vehicle, electrical
system will meet its power demand. Before
starting the winch, make sure that the batte-
ry is in good condition and fully charged, and
electrical connections were made correctly
for the winch model. During the operation of
the winch, vehicle engine should be running
to assure constant charging of the battery.
When connecting the winch to the electrical
installation follow the instructions below.
i
iMPorTanT
For your safety during the operation of
any winch, remember to always disconne-
ct mechanical high current circuit breaker
after you have finished working. A high
current
"disconnecting switch"
allows for the emergency
switching off the winch
and its safe disconnec-
tion when not in use.
A. CONNeCTION FOR WINCH MODeLS:
dwM 8000 hd
dwM 000 hd
dwM 3000 sT
Connection diagram - see section A at the end of the ma-
nual.
1. Connect short red wire with the red cover (E') to the
red terminal (B) on the motor.
2. Connect short black wire (d') to the black terminal
(d) on the motor.
3. Connect short black wire with yellow cover (c') to
the yellow terminal (c) on the motor.
www.dragonwinch.com
switch, e.g.
gB
3