Installation Example Of 3 Base Units - Terra MMH3000 Instrucciones De Uso Y De Instalacion

INSTALLATION EXAMPLE OF 3 BASE UNITS

LNB powering +18V from
1x rd31X in #1 position
4x rd31X (pos. #1 - #4)
4 transponders/programs from H/Hi
4 receivers are connected via through loop
1x rt31X + 3x dm31X (pos. #5 - #8)
1 terrestrial channel/4 programs
1 receiver+3 demodulators are
connected via MPEG2 TS
1x rd31X+7x dm31X (pos. #1 - #8)
1 transponder/8 programs from V/Hi
1 receiver +7 demodulators
are connected via MPEG2 TS
rd31X + 3x dm31X (pos. #1 - #4)
1 transponder/4 programs from V/Lo
1 receiver +3 demodulators
are connected via MPEG2 TS
1x rd31X + 1x dm31X (pos. #5, #6)
1 transponder/2 programs from H/Lo
1 receiver+1 demodulator is
connected via MPEG2 TS
1x mt310 (pos. #7)
1 program from CCTV
1x rt31X (pos. #8)
1 terrestrial channel/1program
11
This is connection's illustration only!
Do not use handheld control unit
while software control from PC is in
operation.
Figure 14.
www.terraelectronics.com