Setting Up Dvd Speaker Output; Setting Up Dvd Dolby Digital - Insignia NS-LTDVD20 Guia Del Usuario

Insignia NS-LTDVD20 20" LCD TV/DVD Combo
4 Press or to highlight On or Off, then
press PLAY.
5 Press one or more times to go back to the
previous menu.
6 To close the menu, press
Exit icon, then press

Setting up DVD speaker output

To set up speaker output:
1 While your TV combo is in DVD mode, press
SETUP.
2 Press or to select the Audio
press PLAY. The Audio Setup Page opens.
-- Audio Setup Page --
Speaker Setup
Dolby Digital Setup
Channel Equalizer
3D Processing
Go To Speaker Setup Page
3 Press or to highlight Speaker Setup,
then press PLAY. The Speaker Setup
Page opens.
-- Speaker Setup Page --
Downmix STR
Audio Setup
4 Press or to highlight Downmix, then
press PLAY.
5 Press or to highlight Lt/Rt or Stereo,
then press PLAY.
• Lt/Rt–On a disc recorded with a
multichannel soundtrack, the output
signal will be incorporated into the left and
right channel.
• STEREO–On a disc recorded with a
multichannel soundtrack, the output
signal will be incorporated into stereo.
6 Press one or more times to go back to the
previous menu.
7 To close the menu, press
Exit icon, then press

Setting up DVD Dolby Digital

to highlight the
PLAY.
icon, then
Lt/Rt
Stereo
to highlight the
PLAY.
www.insignia-products.com
To set up Dolby Digital:
1 While your TV combo is in DVD mode, press
SETUP.
2 Press or to select the Audio
press PLAY. The Audio Setup Page opens.
-- Audio Setup Page --
Speaker Setup
Dolby Digital Setup
Channel Equalizer
3D Processing
Go To Speaker Setup Page
3 Highlight Dolby Digital Setup, then press
PLAY. The Dolby Digital Setup Page opens.
-- Dolby Digital Setup --
Dual Mono STR Stereo
Left Mono
Right Mono
Mixed Mono
D.R.C
Audio Setup
4 Press or to highlight DUAL MONO or
D.R.C, then press PLAY.
• DUAL MONO–This is the output mode for
the left and right signals of the selected
audio output. If it is set to MIXED MONO,
the function only works when the DVD
uses 5.1-channel sound.
• D.R.C–Select to adjust the linear
compression rate to obtain different
compression results for the signals.
5 Press or to change the setting, then
press PLAY.
6 Press one or more times to go back to the
previous menu.
7 To close the menu, press
Exit icon, then press PLAY.
icon, then
to highlight the
21