Linksys WRK54G Guía De Instalación Rápida página 6

want to be connected to your ISP ,
or select Connect on Demand if
you are charged for the time that
you are connected to your ISP .
Telstra: Telstra (HeartBeat Signal)
is a service used in Australia only. If
you are using a HeartBeat Signal
connection, check with your ISP for
setup information.
E
When you have finished
entering your Internet
connection settings, click the
Save Settings button to save
your changes.
F
To configure the Router for your
wireless network, select the
Wireless Tab's Basic Wireless
Settings screen.
G
Wireless Network Mode.
Select the mode you are using
from the drop-down menu: If
you are using only 802.11g,
select G-Only; if you're using
802.11b only, select B-Only; if
you're using both 802.11b and
802.11g, keep Mixed setting.
H
Wireless Network Name (SSID).
The SSID is the network name
shared among all devices in a
wireless network. The SSID must
be identical for all devices in
the wireless network. It is case-
sensitive and must not exceed
32 characters (use any
keyboard character). For
6
Telstra
F