Speedcooking - Cafe CT9800 Manual Del Propietário

Speedcooking

Using Speedcook Features
CAUTION
When using speedcook programs,
remember that the oven, door and dishes will be
very hot!
Before you begin, make sure the turntable is in place.
Use the nonstick metal tray and your own glass or
ceramic cookware, if needed.
The turntable must always be in
place when using the oven.
To Use A Preset Speedcook Menu
Upper oven is already pre-set to cook over 175 popular dishes.
1. Press the Speedcook pad.
If no selection is made within 15 seconds, the display
will revert back to the time of day.
2. Turn the selector dial to select the type of food
category you want. Press the selector dial to enter.
3. Turn the selector dial to select the specific food (menu
selection). Press the selector dial to enter.
or doneness (if required, the oven will prompt you).
Press the selector dial after each selection.
Things That Are Normal
Optimizing Cook Time on the display. The oven
automatically senses the electrical voltage level in
your home and adjusts the cooking time up or down
for proper cooking.
and Pause will appear in the display. Close the door
and press the Start/Pause pad to resume cooking.
dial to change the cooking time. You can change
power levels by pressing the selector dial to edit
setting.
adjust power levels downward if the oven is hot at
the beginning of a program.
been completed, use the resume feature.
14
Put food directly on the non-
stick metal tray to speedcook.
SPEEDCOOK PRESET FOOD
SELECTIONS:
5. Once the display shows Edit or Start, either press
start or the selector dial to start cooking.
Turn the food over when the oven signals Turn Food Over
(for certain foods).
When the oven signals Check for Doneness, check to see
if your food is done to your liking (for certain foods).
To review settings during cooking, press the selector dial.
If you enter an undesired selection at any time, simply
press the Back pad and reenter the desired selections.
cooking, the automatic fan may continue to run for a
short time, and the display will read Oven is Cooling.
The fan will automatically shut off when the internal
parts of the oven have cooled.
on.
during a speedcook cycle, sometimes even at full
power levels. This is normal. The oven senses the
heat level and adjusts automatically.
cycles. The oven begins cooking immediately.
cooking. The relay board is turning components on
and off.
49-2000653 Rev. 0