Before Operating; To Set The Clock; Stop/Clear - Electrolux TINSEB394WRRZ Guía De Uso Y Cuidado

• Before operating your new Microwave Oven make
sure you read and understand this Use and Care
Guide completely.
• Before the Microwave Oven can be used, follow
these procedures:
1. Plug in the oven. Close the door. The oven display
will show ENJOY YOUR OVEN PRESS CLEAR
AND PRESS CLOCK.
2. Press the STOP/CLEAR pad. : will appear.
3. Set clock. See below.

To set the clock

• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
Procedure
Step
1. Press set clock.
2. Enter the correct time of
day by pressing the
numbers in sequence.
3. Press set clock again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the
display. Press the STOP/CLEAR pad and re-enter
the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will
intermittently show ENJOY YOUR OVEN PRESS
CLEAR AND PRESS CLOCK after the power
is reinstated. If this occurs during cooking, the
program will be erased. The time of day will also
be erased. Simply press STOP/CLEAR pad and
reset the clock for the correct time of day.
Your Microwave Oven can be programmed with
the door open except for START and popcorn.
Press

Stop/Clear

set
clock
Press the STOP/CLEAR to:
1 2 1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
3 0
4. Return the time of day to the display.
5. Cancel a program during cooking, press twice.
set
clock

Before Operating

NOTE
13
E