Easypix WDV 5270 Full HD Manual Del Usuario página 21

cover.
2. Lithium-ion battery into the compartment. Note that the metallic
contacts must be aligned with the contacts in the compartment.
3. After the battery is properly installed, close the battery cover.
Charging the battery
When the battery level is low please charge the battery.
1: Turn the camcorder power off .
2: Connect the camcorder and PC via the attached USB cable. When the
battery is being charged the charger lamp will light blue.
3: When the charge is completed the charger lamp turns off. Disconnect
the camera and the PC.
3