4.Proper use
The device is designed for applications operated with a
230 V alternating current source.
Be sure to observe the restrictions in the safety
instructions. The generator is intended to provide electric
tools and light sources with electricity. When using the
device with household appliances, please check their
suitability in accordance with the relevant manufacturer's
instructions. In case of doubt, ask an authorized dealer
of the respective appliance. The machine is to be used
only for its prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries of
any kind caused as a result of this.
5. Layout and items supplied (Fig. 1-3)
1. Carry handle
2. Tank cover
3. Petrol cock
4. Starter cable
5. Motor cover
6. Choke lever
7. ON/OFF switch
8. Earthing connection
9. Economy switch
10. 230 V~ socket
11. Operating status indicator
12. Overload indicator
13. Low oil indicator
14. Screwdriver
15. Spark plug spanner
16. Oil filler/drainage funnel
17. Oil filler/drainage plug(dipstick)
18. Air filter cover
19. Air filter element
20. Spark plug cover
21. Spark plug
6. Technical data
Engine
Model:
Protection type:
Engine:
Cubic capacity:
Oil tank volume:
Fuel tank volume:
Spark plug:
Generator
Mains voltage (V):
Frequency (Hz):
Ampere (A):
Weight:
Nominal power PRP (kW):
Power factor:
Power class:
Noise:
Application information:
1. Optimum temperature in operation: 5 - 40 °C.
2. Altitude:maximum 1000 m.
3. Optimum temperature for storage of the generator:
- 25 - 70 °C.
7. Before putting the generator into
operation
Remove the packaging material and check that all
items have been supplied. Place the generator on a
firm, flat surface near the electrical equipment and
ensure proper ventilation.
7.1 Electrical safety:
Electric supply cables and connected equipment must
•
be in perfect condition.
The generator is to be operated only with equipment
•
whose voltage specifications conform with the
generator's output voltage.
Never connect the generator to the power supply
•
(socket-outlet).
Keep the cable length to the electrical equipment as
•
short as possible.
HH144F
7.2 Environmental protection
IP 23M
Dispose of soiled maintenance material and operating
•
9
4-Stroke,Single cylinder,Air-cooled,OHV.
TORCH A7RTC
G
B
53.5 cc
0,25 L
4,5 L
230 V
50 Hz
4,3 A
13 kg
1,0
1,0
G2
95 dB(A)