Clearing A Macro Key; Using The Master Power Key; Programming The Master Power Key - Universal Electronics ATLAS OCAP 5 Guia Del Usuario

NOTE:
You can program up to 15 key presses into one
macro.
5. Press and hold SETUP until it blinks twice.
6. To add another macro, repeat steps 1 through
5, substituting the new key sequence to be
added in step 4.
NOTE: Programming more than five macros on the
same macro key overwrites previous settings.

Clearing a Macro Key

1. On the remote control, press and hold SETUP
until it blinks twice.
2. Enter 9 9 5. The SETUP key blinks twice.
3. Press the macro key you want to clear once.
4. Press and hold SETUP until it blinks twice.
This macro key is now clear and ready for
reprogramming (see "Programming a Macro Key" on
page 18). If desired, repeat these to clear another Tune-
In key.

USING THE MASTER POWER KEY

The Atlas OCAP 5-Device Remote Control has a unique
feature that allows you to sequentially turn up to five of
your home entertainment devices on or off with a single
key press.
NOTE: MASTER POWER (PWR) only works in the CBL
mode. If it is not programmed, only the cable
converter will turn on or off. In any other
mode, pressing MASTER POWER (PWR) once
will turn the selected device on or off.

Programming the Master Power Key

On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice.
www.urcsupport.com/atlasocap
19