Using The Master Power Key; Clearing The Master Power Key - Universal Electronics ATLAS OCAP 5 Guia Del Usuario

Enter 9 9 5. The last-selected device key
2.
blinks twice.
Press PWR once.
3.
4. For the first device you want in the power on
sequence, press a device key (e.g., CBL) once.
Then press PWR once. For the second device
in the power sequence, press its key once (e.g,
TV). Then press PWR.
5. Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
6. To save the settings and exit the program:
a. Press CBL once.
Press and hold SETUP until the CBL key blinks
b.
twice.

Using the Master Power Key

1. After programming, point the remote control
at the devices. Press CBL once.
2. Press PWR once to sequentially turn the
programmed home entertainment devices on
or off.
You will see the devices turn on or off according to the
programmed sequence.

Clearing the Master Power Key

1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
Enter 9 9 5. The last-selected device key
2.
blinks twice.
Press and release PWR.
3.
www.urcsupport.com/atlasocap
20