Setting Up A Combo Unit - Universal Electronics ATLAS OCAP 5 Guia Del Usuario

VCR Code
Device Type:___________________
DVD Code
Device Type:___________________
AUD Code
Device Type:___________________
CBL Code
Device Type:___________________
TV Code
Device Type:___________________

SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/VCR Combo or a
TV/DVD Combo, you need to follow special steps to set
it up. Perform the following instructions to control
combo device:
1. For a TV/VCR Combo, turn on your TV/VCR
Combo and insert a video cassette. (For a TV/
DVD Combo, insert a DVD).
2. On the remote control, press VCR once; it will
blink once. Then press and hold SETUP until
the VCR key blinks twice.
3. Use the "Manufacturer's Codes (Códigos de
Fabricante)" starting on page 52 to locate the
brand name and enter the first four-digit code
for your combo device (for example, TV/
VCR). If you perform this procedure correctly,
the VCR key will blink twice.
www.urcsupport.com/atlasocap
11